Errors in operating modes
This segment of faults is denoted by symbols CE, AC, and 4C2. On models without screens, a similar error is reflected by blinking of all washing modes and lighting up of the temperature indicator button lamp, located at the very top. In this case, the code indicates that the water temperature is exceeded.
To correct the error, the first thing to do is to check if the fill hose is not connected to the hot water nozzle. If this is okay, you should restart the machine. In case of a one-time failure, it will work normally.
Incorrect preparations for washing
How do combinations of DE, DE1, DE2, DC, DC1, DC2, and ED respond? Units without screens will respond to an error by flashing all wash modes and temperatures. The combination shown means that the door is not closed.
Eliminating the error is simple – you should check the condition of the machine door. Perhaps a piece of thread is entangled in the hook, or the lock is interfering with the mechanism. Perhaps one of the parts of the door is bent.
What to do – H1, H2, HE, HE1, HE2, HC, HC1, HC2, E5, E6 appeared? On the panel of the machine, where the display is not provided, the washing indicators, as well as the second from the top and the lowest temperature indicator turn on. It should be noted that when working without heating, the error does not appear.
There are two main reasons for the error here:
– The unit is not properly connected to the power supply.
– TEN (heating element) is not working.
If you try to correct the situation yourself, you should check the correct connection of the unit to the mains. If an extension cord is used, it is better to replace it with a new one or make a direct connection.
If, as a result of the performed actions, the machine again indicates a malfunction, you should contact the professionals with Poway Appliance Service Center.
What does the LE, LC, and E9 combination mean? Machines without a screen signal malfunction with the wash buttons lit and the temperature indicators at the very bottom and top.
Such an error appears on the screen when water leaks from the machine. There are several known reasons for its appearance:
– The drain hose lies below the proper level.
– It is not properly connected to the sewage system.
– Water is leaking through a hole or crack in the tank.
In order to fix the problem, you should perform the following actions:
– Disconnect the unit from the mains.
– Check in what position is the hose for drainage. Normally, it should first go up and then go down.
– Check if the drain filter is open. This may also be leaking.
– Disconnect the discharge hose from the drain and put the end of it in a sink or other container.
Then you should restart the machine. If all went well – the cause is eliminated.
What does the appearance of UE, UB, and E4 on the display mean? On the control panel without a display in this case note the flashing of all washing modes and the temperature indicator of the second from the top. The combination indicates the difficulty of the machine with even distribution of laundry before spinning.
To fix the situation, you need to perform the following actions:
– Drain the water from the tank.
– Disconnect the machine from the power supply.
– After waiting 15 minutes, open the door.
– Having untangled the piled laundry, distribute it evenly over the tank.
– Close the door and restart the program.
– In some cases, the machine continues to operate normally after these operations.
Damage to the temperature sensor of the machine
What should I do if the display shows tE, Ec, etc? If the machine is not equipped with a display, with an identical malfunction on the control panel of the washing machine from Samsung all washing modes and temperature indicators “Bio 60 ° C” and “60 ° C” light up.
The error indicates a problem with the temperature sensor, which is responsible for measuring the temperature of the water in the machine.
The breakdown can be eliminated independently with the help of overloading. If this action did not bring any results, you need to contact the service center. Most likely, it will be necessary to replace the sensor or the heating element.
High foaming alarm
If the combinations Sud (5ud) or Sd (5d) appear on the screen, this indicates that there is too much foam in the tank. Most often this is due to the use of powder that is not suitable for washing in the washing machine.
The amount of detergent is also easy to calculate: the norm is considered 1 tbsp per 1 kg of dry laundry.
In this case, you do not need to take any action. After the foam settles, the unit will automatically continue washing.
We have appliance repair experts available today! Call a professional Poway Appliance Service Center technician by phone or book your service.
Our service center is open 24/7, so you can easily schedule a convenient repair time. The specialist will arrive at the agreed time, carry out a diagnosis, and, if necessary, offer repairs. If you are willing, your appliance will be repaired directly on-site within 1-2 hours. We provide top-notch service at an affordable price!
Contact us
