The operation of such equipment involves the use of various modes, each of which is characterized by certain settings. Among other things, you can choose the desired heating temperature. But occasionally it happens that the device simply stops heating water.
In such situations, washing dishes becomes impossible, and there are two ways to solve the problem – on your own by finding and fixing the problem, or by ordering dishwasher repair at Poway Appliance Service Center from the professionals in this business.
Is it always necessary to repair dishwashers?
In many situations, it is possible to restore the water heating function without carrying out repairs. In some cases, a show of care and the consistent performance of a few elementary actions is enough. For example:
Lack of heating at the first use. It is necessary to check the correctness of the connection of the device and, in case of violations, correct the found deficiencies with your own hands or by inviting specialists.
Incorrect mode selection. Quite often users set the settings once and do not change them anymore. And if you selected heating up to 30 degrees, then you should not be surprised by the lack of hot water. The situation can be corrected by changing the settings.
Periodic clogging of the filter. In this case, the water circulation deteriorates significantly, the heating element remains switched off. The solution is regular cleaning of the filter in accordance with the recommendations of the manufacturer of the equipment.
If these actions did not help, it is better to call a master, who will be able to determine the malfunction by careful diagnosis, and then fix the problem at the customer’s home.
What problems with dishwashers are common?
Some of the most common breakdowns include:
Failure of the heating element. Repair in this case is not practiced. The only solution will be to replace the heating element.
Breakdown of the thermostat. This leads to sending incorrect data to the software module. This fault can be eliminated by replacing the damaged temperature sensor.
Malfunction of the control module. In critical cases, this element is also subject to replacement, but usually re-flashing the module helps.
In all of these situations, dishwasher repair for Poway Appliance Service Center won’t take long. If, of course, do not try to solve the problem on your own, and immediately contact our company.
Contact us
