Microwaves are reliable household helpers, which is appreciated by a large number of hostesses. With them it is easy and simple to cook or warm up food, without much effort. Any microwave is reliable, so with proper use and care, will last for many years. If the oven for any reason has failed, you should not panic, because by contacting Poway Appliance Service Center in time, you can be sure that the repair of the microwave is carried out at the highest professional level. The technicians before performing Sharp Microwave Repair in Poway, CA will perform a diagnosis, accurately determining the malfunction.

Our company has been in the market for appliance repair since 2001. We employ Sharp Microwave Repair and Service technicians with over 20 years of experience.

Main 5 reasons why the microwave does not turn on and does not warm up

• Damage to the power cord – you should carefully inspect the power cord; it may be damaged. It should not have obvious kinks, burned areas. The first can occur if the cable is pinched by something heavy, or if the oven is moved carelessly. The second case occurs in case of voltage fluctuations or short circuits. A damaged cable should not be repaired but replaced. Our technician specializing in Sharp Microwave Repair will replace it.

• Blown fuses – There are two fuses in the microwave design, the high voltage sensor and the temperature sensor. If either fuse blows, the microwave will no longer turn on, the blown fuse (or even both) must be replaced with a new one. In addition to the fuses, during the diagnosis it is necessary to visually inspect the other elements of the microwave for burnt areas or blistering. Fuses are replaced by our Sharp Microwave Repair and Service technicians.

• Transformer failure – can be similar to the second case we described, because one of the most vulnerable elements of the transformer is the temperature sensor, which can burn out. Another part of the transformer that you should also pay attention to is its winding. To diagnose the transformer will require disassembly of the body of the microwave and skills with a multimeter in the conditions of the service center that specializes in Sharp Microwave Repair.

• The electronic control board is the control unit for the entire microwave that is present in the design of an electronically controlled appliance. If the board is damaged, the microwave may well fail to start. It is necessary to dismantle the board from the body of the device and carefully inspect for burned tracks, signs of oxidation or blown elements on the board. Our specialists are practiced in Sharp Microwave Repair and Service and will replace the electronic control unit when you contact us.

• Magnetron malfunction is the main device in the microwave generation process, so if the magnetron burns out, it needs to be replaced with a new one. Until this is done, the microwave will not turn on. Keep in mind a faulty magnetron, before finally burning out, gives you a signal of failure, during the operation of the microwave there is an unnatural hum and crackle. All replacement parts that are installed by our Sharp Microwave Repair technicians.

Microwave is a very useful and necessary appliance in the household. It saves us from the routine heating of food on the microwave, doing the whole procedure in a matter of minutes. This is a very important property, because in the conditions of modern employment time is very limited and sometimes it is severely lacking. The breakdown of the microwave has a huge discomfort and brings some chaos to our household.

Most of the work involved in diagnosing a microwave involves not only knowing and understanding its design, but also working with high voltage. 

This means that the most knowledgeable solution will be to have your microwave diagnosed in a Poway Appliance Service Center environment and by an experienced technician. Microwave breakdowns can manifest themselves in different ways, depending on the origin of the malfunction. This means that Sharp Microwave Repair and Service experienced technicians can determine the source of the problem and how to fix it.