The gas range is a very popular household appliance. It is convenient to use, as it can be used not only in a permanent dwelling, but also in a country house. The convenience of using a gas range lies in the speed of cooking and in the fact that it can be used without the presence of any communications in the room. However, a gas range, like any other appliance is capable of malfunctioning, in addition, its malfunctions can threaten human health and life, therefore, not paying attention to malfunctions is strongly not recommended. In case of a breakdown, please contact the master of gas range repair Poway Appliance Service Center. We perform quality Signature Range Repair in Poway, CA.

Our service center has the best professional masters at Signature Range Repair and Service who will perform quality appliance repair. They have over 20 years of experience. We have been in business since 2001.

What are some of the signs of malfunction 

One of the most “ridiculous” breakdowns where the ignition won’t turn on is forgetting to plug the plug into the outlet. If your range is connected to the mains, pay attention to the following points:

• Does the auto-ignition occur when you apply gas and start the button at the same time.
• You hear a crackle but no spark appears, hence the flame does not ignite.
• The burner turns off the moment you release the knob.
• The appliance may trip when you are not using the ignition.
• Starting the ignition trips the circuit breaker in the electrical box.
• The ignition circuit is shorted out.This will require the help of Signature Range Repair.

If you are also experiencing one of these situations, contact the professionals at Signature Range Repair and Service. 

There are several factors that disrupt the operation of the ignition:

• No spark is formed on the electrodes.
• Grease or condensation droplets have gotten inside the ignition system.
• The insulation of the plug is broken.
• The ignition transformer is defective.
• The contacts have oxidized or there has been a short circuit. 

Often breakdowns occur during wet cleaning on the range. They are eliminated by cleaning the contacts and listening to the candle. If a failure occurs, the plug should be replaced by Signature Range Repair specialists.

The burner does not light immediately

Users of ranges with auto-ignition sometimes encounter this failure – the burner ignites slowly or goes out. This is due to contamination of the thermocouple – a component that is located next to the burner. 

The element can be cleaned with sandpaper, which is used in construction work. If cleaning does not help, you may need to replace the piezo element or the entire thermocouple. Our professionals at Signature Range Repair and Service, are quick to perform the replacement. 

Only one burner won’t light

There are cases when one burner does not light, but the other burners work normally. The most common causes are as follows:

• Damage to the wire that fits the electrode, malfunction of the device that generates the spark or the entire unit.

• Clogging of the nozzle nozzle. It is very often clogged with food residue. You can fix the problem by cleaning or replacing the nozzle. Signature Range Repair will fix the problem as soon as possible.

• Breakdown of the gas control element. In this case, the flame appears but goes out when the user releases the button. The breakage is eliminated by replacing the entire mechanism or its individual elements.

• Sometimes gas does not come in well, and the burner does not light up immediately, if the gas tap turns badly, and the handle is clogged with soot, grease, debris. You need to clean and lubricate it well.

There is no electric ignition on several burners

The service is periodically addressed with a problem when the ignition does not work on several burners, but they are normally ignited with matches. This can arise due to the candle. The malfunction is most often eliminated by cleaning it or checking the power wire. If there is damage to the plug, it should be replaced by a specialist, who will replace the motor when you contact us.

All burners do not light automatically

Why all burners may not light:

• The gas supply has low pressure, and the nozzles need to be replaced.
• A break in the electrical wiring, which is solved by replacing or repairing the power supply wires.
• Breakage of the block that produces ignition, which is corrected only by replacing this element. Specialists, at home, will conduct diagnostics.

Many breakdowns can be eliminated independently. However, if you have made all possible attempts or do not know how to do it correctly, trust the Poway Appliance Service Center. That way, you’ll keep yourself and your loved ones safe from accidents. Signature Range Repair and Service specialists will be able to quickly identify the source of the problem. To keep the ignition working consistently, follow basic operating rules, keep your range clean, and perform regular maintenance.