Cooktop have recently deservedly gained high popularity among housewives. But regardless of the type, manufacturer and proper care, cooktop, unfortunately, sometimes fails. Our Poway Appliance Service Center technicians repair cooktops, glass ceramic cooktops, gas cooktops, and induction cooktops at your home or service center shop. We provide quality Cosmo Cooktop Repair in Poway, CA.

Our company has been operating since 2001. Our team of qualified Cosmo Cooktop Repair and Service technicians have over 20 years of experience.

The main types of hobs are induction hobs coated with ceramics or glass-ceramics, electric and gas hobs. Induction surfaces only heat dishes, while the work area itself is practically cold. Temperature and power can be adjusted from minimum to maximum. Gas stoves are complex and explosive equipment. Cosmo Cooktop Repair will be carried out by our specialists.

The main causes and errors in the operation of cooktop

Induction cooktop errors

Noises when the induction hob is operating

Reason: Induction heating sends electrical waves to the bottom of the cookware, causing the surface to vibrate.

Solution: This is normal operating noise and does not indicate any malfunction.

Unpleasant, low sound similar to the operation of a transformer

Cause: The burner is operating at a high-power level.

Remedy: Reduce heat level or turn off work area. This breakdown will be repaired by Cosmo Cooktop Repair and Service specialists.

Vibration or rattling of dishes

Reason: This noise is created by cookware made from layers of different materials.

Remedy: replace the dishes or change the product that is cooked in them. As incredible as it may sound, the type of product is also one of the factors influencing the sound produced by the panel.

Fan noise

Reason: all induction hobs are equipped with a fan that cools the panel and its parts. Depending on the degree of heating and the number of working burners, the noise level also depends.

Remedy: Even after the device is turned off, the fan will continue to run to cool down hot areas. Our masters for Cosmo Cooktop Repair will fix this problem.

Glass ceramic panel

Cause: System failure or overheating due to prolonged operation.

Remedy: Disconnect the hob from the power supply for a few minutes, then connect it again and press the on/off key.

Sensors do not respond well

Cause: Panel dirty/strong external flashing light.

Remedy: Clean the panel and check that it is dry/remove the external light source or place the panel out of its reach. It is better to entrust the replacement of sensors to the trusted specialists of Cosmo Cooktop Repair and Service.

The panel turns off by itself and an unfamiliar message appears on the display

Reason: the device is dirty/water has been spilled/there is a foreign object.

Remedy: clean the surface, wipe with a dry cloth/remove all excess from the panel.

Electric cooktop

The panel turns off

Reason: the heat level is set to 00 on all burners/the control panel is dirty, water has been spilled, or there is a foreign object.

Remedy: if none of the burners is heated, it turns off, clean the panel and wipe it with a dry cloth, remove the object.

Sensors do not respond to touch

Reason: panel overheating, contamination, etc.

Remedy: Disconnect the device from the power supply, wait a few minutes and turn it on again.

Gas cooktop

Due to the nature of the energy resource used (gas), we urge you not to carry out repairs yourself and contact a service center. There is a high probability of an explosion. Our Cosmo Cooktop Repair specialists will quickly determine the nature of the breakdown and be able to easily fix it.

All of the above errors, as a rule, do not pose a particular threat to the device and the person. But as practice shows, the main reason for their occurrence is neglecting to care for the panel and not reading the instructions after purchase. 

But if your cooktop is out of order, the right solution would be to diagnose the unit in the Poway Appliance Service Center by our specialist. The hob is a complex household appliance, and independent repairs can lead to deterioration in the operation of the equipment. The trained technicians at Cosmo Cooktop Repair and Service can quickly resolve your issue.