Gas range is a very popular household appliance. However, a gas range, like any other appliance is capable of malfunctioning, in addition, its malfunctions can threaten human health and life, therefore, ignoring malfunctions is strongly not recommended. In case of a breakdown, contact a master gas stove repair technician at Poway Appliance Service Center. We perform quality Samsung Range Repair in Poway, CA.

Our company has been in the appliance repair market since 2001. We employ Samsung Range Repair and Service technicians with over 20 years of experience.

Let’s take a look at the most common breakdowns

Burner breakage, burners, flame spreaders

Gas burners suddenly turn off by themselves – most likely the reason is in the solenoid valve, which is responsible for the gas supply to the burner. It is also worth paying attention to the temperature sensor (thermocouple).

Faulty electric ignition 

Usually with the gas supply in this situation everything is in order. But if the ignition unit stopped giving spark to the spark plug, it is subject to mandatory replacement in the conditions of the service center Samsung Range Repair.

Malfunction of the feed regulator

Usually, with prolonged use, the gas regulators that are located behind the knobs can fail. External cleaning, lubrication, or replacement may help. Samsung Range Repair and Service specialists will solve this problem when you contact us.

Noise during operation of the burner

The malfunction occurs when the burner is incorrectly installed after cleaning. The solution is to check the correct installation. If the problem is not eliminated, it is worth considering replacing the burner.

Uneven burning of the burners

If one of the burners has a larger flame than the others, it means that it is necessary to replace the burner nozzles. If the flame is increased on all burners, it is urgent to check the pressure in the gas supply system. It is better to call a Samsung Range Repair technician.

If the flame is weak on the contrary

This is the same as with a strong flame! Check the hose to see if it is pinched, and if the problem persists, call a Samsung Range Repair and Service technician. Since most likely the fault is in the pressure system.

Burner does not light up, it does not light up immediately, what can be?

• The pressure plug is clogged,
• The ignition plug is out of order.
• Burner (burner) is displaced.
• Malfunction in the gas control system (leaks).

Burners are smoking

Check the nozzles for contamination. This is more likely to be the only cause. Because the cooking products during operation “mysteriously” get into all corners of the range causing clogs and consequently interfere with the operation of the range.

The gas regulating taps are difficult to turn 

This is mainly due to grease sticking to the turning mechanisms (adjustment knob and plastic rings). Remove everything and wash with soapy water. To a lesser extent due to lack of grease inside the faucet. You should disassemble the faulty faucet, clean out the old graphite grease and apply new grease. 

Do not overdo the amount of grease, otherwise over time the faucet holes will become clogged with excess. If you are not able to solve this problem on your own, then contact Samsung Range Repair.

In any case, with any breakdown, you should not risk doing the repair yourself. Gas is first of all a danger. It is better to seek help from Poway Appliance Service Center, who will help you with the repair in complete safety. Gas stoves, if serviced in a timely manner, will last a long time. You can get your appliance serviced by a trusted company. Many of the faults can be fixed by Samsung Range Repair and Service experts but there are cases when the unit becomes completely unusable if customers do not turn to them in time to solve the problems.