The stove is an essential attribute in every kitchen, it can be called a “nurse”. And if it fails, then the whole family remains hungry and angry. Poway Appliance Service Center can solve this problem. We have been performing Electrolux Stove Repair in Poway, CA at a client’s home for over 20 years. And we do our work efficiently and quickly.

Unlike gas stoves, electric stoves are much easier to install and operate. But the repair of the electric stove has to be done more often, as they break more often. Today, Electrolux Stove Repair and Service is a fairly popular and widespread service. After all, electric stoves are becoming more and more popular, replacing gas ones.

Typical breakdowns of electric stoves

Despite the variety of models of electric stoves, breakdowns of electric stoves still occur, and they are varied.

Let’s look at the most basic faults:

The electric stove does not turn on

An unpleasant situation when the stove turns off on its own, especially if this happens at the most inopportune moment. The failure of the control module could lead to the appearance of such a breakdown. Also in consequence, the failure of the cooling fan. You should not allow the repetition of such a problem, since the equipment may completely fail. Take advantage of the service of the Electrolux Stove Repair master in time.

Turning off the stove can be independent only if the timer has been set for a certain time. You can adjust this process yourself at home, without the help of a specialist. Automatic shutdown of the device due to long work.

Electric stove not working

There can be many reasons for an oven failure. Here are some of the most popular:

• Thermal sensor failure.
• Module failure.
• Not working touchpad.
• Poor door seal.
• The fan is not working.
• Damaged power cord.

As you have noticed, there can be a lot of reasons for damage to the oven. Therefore, you should not independently climb to it with a screwdriver without determining the exact cause of the breakdown. It is better to entrust this work to a qualified Electrolux Stove Repair and Service specialist.

Electric stove burners not working

If your stove’s burners aren’t heating well enough, make sure you’re using the right cookware and that the bottom of the cookware is snug against the burners.

If everything is fine with the dishes, then the problem may be a loose fit of the power system on the other side of the heating plate. Another possible cause of burners not working could be a broken sensor that regulates the temperature. An Electrolux Stove Repair specialist will pinpoint the cause and fix it.

The board gives errors

If the electric stove gives an error, Electrolux Stove Repair and Service is indispensable here. But before you undertake to repair it, you need to determine the exact cause of the error. As a rule, they are like this:

• Thermal sensor failure.
• Module failure.
• Malfunction of the electrical board matrix.
• The electric stove control panel does not work.

In each plate, the error numbers are different and depend on the manufacturer and the year of manufacture of the plate.

The plate knocks out the machine

The main reason lies in the properties of nichrome, which is used in heating devices. To prevent plugs from knocking out, you need to install a circuit breaker 2 or 2.5 times more than the norm for the trip current. If the machine knocks out constantly after a while, this means that he is trying to avoid burning the wiring. Do not try to figure out such a problem yourself and do not leave the stove on. To solve such a breakdown, it is better to call an Electrolux Stove Repair specialist.

As you can see, there can be a lot of breakdowns, and most of them are almost impossible to solve on your own. And it doesn’t take long to repair. Timely contacting a specialized service center will avoid serious problems and high financial costs.

If a breakdown has already occurred, Poway Appliance Service Center offers you high-quality and fast repair of electric stoves at the most affordable prices. The price of Electrolux Stove Repair and Service consists of the cost of labor and replaced components, if any. We receive all components directly from the manufacturer, so the price for them is the lowest.